Wall exterior panels aluminum composite
The wall exterior panels aluminum composite is a good choice for thermal insulation decoration materials. Its surface is a high-quality color embossed decorative metal plate treated with a special layer, and the middle layer is a hard high-density polyurethane foam thermal insulation treated with flame-retardant treatment. The bottom surface is an aluminum foil protective layer that plays a role of heat insulation, heat preservation and moisture prevention.
It has the characteristics of thermal insulation, waterproof and flame retardant, sound insulation and noise reduction, convenient installation, beautiful and durable. Because this PU sandwich panel is lightweight and easy to install, it is not restricted by the seasonal environment and is suitable for all seasons.
Parameters
Product NameWall exterior panels aluminum composite
Design StyleSolid color, brick grain, stone grain, wood grain or customized
Surface MaterialGalvalume steel sheet(aluminum ,zinc )
Back MaterialAluminium foil paper
Core materialRigid Polyurethane Foam
Painted surfaceHigh temperature HDP paint
Thickness16mm/20mm
LengthCustomer's Choice
Weight3.5-3.7Kg/銕?/p>
CertificateCE; ISO9001
Effective width383mm
Length3800mm, 5800mm
Delivery time10-15 working days
PortQINGDAO
Fire-proof levelB level
AdvantagesFire resistant,Waterproof,Thermal Insulation,Soundproof,Earthquake proof,Eco-friendly,Flame Retardant,Easy Installation.
ApplicationHotel, Villa, Apartment,Office Building,Hospital,School,Mall
Features of wall exterior panels
1. After special treatment, it has good flame retardant properties.
2. Traditional exterior wall decoration materials generally have substrate degradation caused by water and cold penetration, which leads to problems such as water seepage on indoor walls.
3. Even in severe cold areas, the exterior wall thermal insulation and decoration integrated board with stable performance has no worries of water seepage and deformation, which prolongs the service life of the building.
4. Its own structure and the compact concave-convex plug-in and buckle-groove installation method between the plates avoids the structural damage caused by the cycle of rain, snow, freezing, thawing, dry and wet, and cleans up the water seepage on the wall after installation. It is good to avoid the phenomenon of mold on the indoor wall.
5. Thermal insulation
The thermal insulation properties of Wall exterior panels, used in buildings, we can better thermal insulation inside.
6. Cost savings
The installation is simple, which can save our cost to a certain extent, and the lightness of the board also reduces the load on the wall.
7. Anti-shock and anti-crack
The light weight reduces the load on the wall and reduces the additional impact on the building when earthquake disasters come.
Steps of installation
1. Setting out the line: The reference line is the initial construction line that is used as the starting point of the construction in both vertical and horizontal directions after the construction starts, and the standard line that keeps the relative position of the graphics on the four walls unchanged. Generally, the vertical reference line of construction should be placed on the top of the building, and the horizontal reference line of construction should be placed at the contour lines of the yin and yang corners and the characteristic contours.
2. Cutting: According to the design requirements and combined with the actual requirements of the construction site, the metal carved panels are cut to the specified size.
3. Plug-in: The metal engraved board is a light board, which is formed by plugging the slot between the board and the board.
4. Anchoring: In order to completely eliminate the phenomenon of delamination of thermal insulation decorative panels and improve the overall safety of thermal insulation decorative panels, use anchors, fasten the decorative layer, and firmly connect the thermal insulation decorative panels to the wall again.
5. Seams: When installing thermal insulation decorative panels on site, use a middle seam fitting between the two panels to splicing the seams between the panels
Programs and Application
DIBAIER wall panels are widely used in wall cladding ,ceiling,
LGS Prefab Houses, Villas, Office Buildings, Schools, Showrooms, Hotels, and Warehouses etc
FAQ
Q1.Are you manufacturer or trade company?
A.We are manufacturer and there are 3 family factories in Jinan city
Q2:Can you produce panels as our requirements?
Yes, OEM is available. We have professional team to do anything what you want from us.
Q3.Is the sample available?
Yes, we are providing free of samples are available for you to check the quality once confirmed after 1~2day.
Q4.Is there the products tested before shipping?
Yes, of course. All of our wall panels belt we all will has been 100%QC before shipping. We test every batch every day.
Q5.How your quality guarantee?
We have 100% quality guarantee to customers. We will be responsible for any quality problem.
Q6.Can we visit your factory before place the order?
Yes,Very welcome that must be nice to set up good relationship for business.
Q7.Can we be your agent?
Yes, welcome to cooperation with this. We have big promotion in the market now. For the details please contact with our overseas manager.Composite Wall Panels price
website:http://www.dibaier-panel.com/w....all-panel/composite-